hopelessGC
04-13 05:27 PM
Well done
wallpaper cricket world cup final 2011
missourian
05-29 05:34 PM
Just I got the success message, it's working!!!
myvoice23
08-06 10:24 PM
PD: July 2004
RD: July 03 2007
ND: Sept 13 2007
140 Approved: May 07
485 Pending: NSC
name checking: pending (got to know with Recent infopass appointment)
I got hold of IO this morning using POJ method. She said, my case has been assigned to IO.
RD: July 03 2007
ND: Sept 13 2007
140 Approved: May 07
485 Pending: NSC
name checking: pending (got to know with Recent infopass appointment)
I got hold of IO this morning using POJ method. She said, my case has been assigned to IO.
2011 cricket world cup final pics
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
more...
boreal
01-19 04:08 PM
I have sent the letter to President as well as IV.
Sent the letter to the President and IV.
Sent the letter to the President and IV.
gclabor07
06-18 12:20 PM
I will participate in this campaign in however way possible. I've avoided traveling because of the hassles of stamping and I don't EAD/AP due to missing the July 2007 bus.
more...
akred
07-14 07:47 PM
Its not only for illegals but its also for kids of legals that aged out due to retrogression or backlogs in visas...plz don't be selfish with view points like "it doesnt help us so im gonna oppose it"....instead help the children who aged out due to the visa backlogs!!! Read what Greg Siskind wrote:
FYI - You can read the bill at http://rs9.loc.gov/cgi-bin/bdquery/z?d109:SN02075: . Note that it applies to kids who entered illegally and kids who entered legally but became illegal later.
On the 245(i) question, unfortunately I have heard nothing about this being reintroduced any time soon.
Posted by: Greg Siskind | July 14, 2007 at 05:24 AM
Aging out does not mean that you become illegal. I suspect you are from Alipac or NumbersUSA trying to bait IV into supporting something to do with illegal immigration.
FYI - You can read the bill at http://rs9.loc.gov/cgi-bin/bdquery/z?d109:SN02075: . Note that it applies to kids who entered illegally and kids who entered legally but became illegal later.
On the 245(i) question, unfortunately I have heard nothing about this being reintroduced any time soon.
Posted by: Greg Siskind | July 14, 2007 at 05:24 AM
Aging out does not mean that you become illegal. I suspect you are from Alipac or NumbersUSA trying to bait IV into supporting something to do with illegal immigration.
2010 cricket world cup final 2011
letstalklc
11-03 11:13 AM
EB2 I will remain same
EB3 I will move little bit...
Hoping for the Jan bulletin if at all any qurterly spillover.....
some one from Immigration Voice should get the info USCIS regarding thequrterly spillover.
EB3 I will move little bit...
Hoping for the Jan bulletin if at all any qurterly spillover.....
some one from Immigration Voice should get the info USCIS regarding thequrterly spillover.
more...
Libra
07-21 02:43 PM
E-filed: July 9th 2008
Received Paper receipt and FP notice within a week.
FP: Aug 2nd 2008 (Scheduled on)
Status Pending
Received Paper receipt and FP notice within a week.
FP: Aug 2nd 2008 (Scheduled on)
Status Pending
hair cricket world cup final 2011
WeShallOvercome
11-30 12:21 AM
.
One thing , did any other reputed site report this news ?
It's on Greg Siskind's blog as well
One thing , did any other reputed site report this news ?
It's on Greg Siskind's blog as well
more...
masterji
08-09 02:37 PM
Is there a way to receive an official answer from USCIS (may be IV can ask the question, not sure)? Or is there a law that specifically bars people to leave GC sponsoring employers? I was unable to find from the Internet. Can anyone find?
hot world cup cricket final 2011
sayantan76
05-10 12:33 PM
..
There is something seriously wrong here.....one gets red dots for even simply truthfully recording answers to some questions asked by administrator......or are the red dots simply to protest/ express displeasure with the fact that my GC process was not as difficult as some other people.......its like "misery likes company" - i am miserable bcos i dont have a GC and hence am pissed off at this guy who despite not being crazy about GC got his in 7 months.........so i will give him red dots..............
Guys - get over it.........look at the general tone of posts from all on this particular thread - GC did not make any "big" change to most folks.......
For the more rational beings - i genuinely hope that you get your gcs within reasonable wait times and the waiting time does not take away from the personal and professional successes you deserve!
There is something seriously wrong here.....one gets red dots for even simply truthfully recording answers to some questions asked by administrator......or are the red dots simply to protest/ express displeasure with the fact that my GC process was not as difficult as some other people.......its like "misery likes company" - i am miserable bcos i dont have a GC and hence am pissed off at this guy who despite not being crazy about GC got his in 7 months.........so i will give him red dots..............
Guys - get over it.........look at the general tone of posts from all on this particular thread - GC did not make any "big" change to most folks.......
For the more rational beings - i genuinely hope that you get your gcs within reasonable wait times and the waiting time does not take away from the personal and professional successes you deserve!
more...
house cricket world cup final 2011
chanduv23
08-11 09:17 PM
IMO, the key criterion is "occupational classification" under which the new job falls under, not the technologies used. For example, it is logical to conclude that a Software Engineer position that requires programming in Java is in the same or similar occupational classification as a Software Engineer job that requires programming in .NET.
One could argue that .NET is a different technology than Java, but most if not all would agree they fall under the same/similar occupational classification.
So as long as you can make a strong case that the occupational classification for jobs is the same/similar, I don't think there is a problem.
Then again, I am not a lawyer and all that...
In that case, both my old and new job (responsibilities and titles) fall under 15-1031.00 if we take into consideration a broader classification where job duties are the same but technologies are probably 60% same but some technologies mentioned in my L/C are obsolete and my current employer does not list those technologies.
One could argue that .NET is a different technology than Java, but most if not all would agree they fall under the same/similar occupational classification.
So as long as you can make a strong case that the occupational classification for jobs is the same/similar, I don't think there is a problem.
Then again, I am not a lawyer and all that...
In that case, both my old and new job (responsibilities and titles) fall under 15-1031.00 if we take into consideration a broader classification where job duties are the same but technologies are probably 60% same but some technologies mentioned in my L/C are obsolete and my current employer does not list those technologies.
tattoo cricket world cup final 2011
knacath
10-19 02:57 PM
Ap
more...
pictures World Cup Final
bujjigadu123
03-03 06:05 PM
Did you wire transfer funds too many times in larger amounts?
Hi
Sorry for the delay in response... I did transfer money but not a large amount. Around three or four times I transferred around $3K for personal purposes.
Hi
Sorry for the delay in response... I did transfer money but not a large amount. Around three or four times I transferred around $3K for personal purposes.
dresses cricket world cup final 2011
zen
03-26 10:11 PM
In Florida, one has to show an EVL before they give the one year "temporary" license. I wonder what happens when your H-1B expires and your renewed H-1B has not arrived, sit at home:confused:
In one word - YES !!! the DL office in georgia would not renew my license even 1 day early ..my old EAD was expiring in 6 days and I had my new EAD in hand. went to DL office and asked them to renew ..they said come when old license expires ,,I said I would need to take a holiday just for renewal - they said - not our problem.
I said - I would be driving on expired license when I come to DL office ..they said talk to immigration ..I said do you know legal immi and USCIS is broken :)
I told my manager ...these guys cannot even add 2 plus 2 ...(old ead expiring on 5th and new one starting from 6th )
In one word - YES !!! the DL office in georgia would not renew my license even 1 day early ..my old EAD was expiring in 6 days and I had my new EAD in hand. went to DL office and asked them to renew ..they said come when old license expires ,,I said I would need to take a holiday just for renewal - they said - not our problem.
I said - I would be driving on expired license when I come to DL office ..they said talk to immigration ..I said do you know legal immi and USCIS is broken :)
I told my manager ...these guys cannot even add 2 plus 2 ...(old ead expiring on 5th and new one starting from 6th )
more...
makeup 2011 cricket world cup final
payur
06-27 08:15 AM
You seem to have got your case approved and you have filed your wife's I485, correct me if I am wrong.
What do you say to people who have been waiting from 2002 and 2003 and 2004, as of today there is no difference for person who got labor approved in May 2007 and case with priority date May 2003. For lot of them it has been a frustrating and stressful period, mainly because their spouses have been idle.
How on earth can you come with this idea, see the traffic on this site now, when core IV team was fighting for the retrogression and other benefits for our cause, there were very few. The world is selfish buddy. I wish you good luck on this idea.
What do you say to people who have been waiting from 2002 and 2003 and 2004, as of today there is no difference for person who got labor approved in May 2007 and case with priority date May 2003. For lot of them it has been a frustrating and stressful period, mainly because their spouses have been idle.
How on earth can you come with this idea, see the traffic on this site now, when core IV team was fighting for the retrogression and other benefits for our cause, there were very few. The world is selfish buddy. I wish you good luck on this idea.
girlfriend world cup final 2011 cricket.
pointlesswait
11-19 02:28 PM
a self serving proposal..
MS is just a pretext for many who are here. MS is worthless if you are a software engineer.. you don't need MS to be coding in Java or .NET...
MS from some vague sidey backstreet community college cannot be compared to MS from other better off schools.
your proposal is distracting from the main agenda. CIR or other relief measures.
In the same lines as H1B, could we look into if its possible to add a quota for US Masters degree holders irrespective of country of birth for green Card also. This would be in addition to the existing Employment based quotas.
Does anyone know how they added 20k H1B quota for Masters degree holders? Who sponsored that bill? May be we should talk to the same people.
I would think there would be a little less resistance for this? This would ease the pressure on both EB2 and EB3.
I dont know if this has been previously looked at. I know there were talks of excluding these people from quota all together.
MS is just a pretext for many who are here. MS is worthless if you are a software engineer.. you don't need MS to be coding in Java or .NET...
MS from some vague sidey backstreet community college cannot be compared to MS from other better off schools.
your proposal is distracting from the main agenda. CIR or other relief measures.
In the same lines as H1B, could we look into if its possible to add a quota for US Masters degree holders irrespective of country of birth for green Card also. This would be in addition to the existing Employment based quotas.
Does anyone know how they added 20k H1B quota for Masters degree holders? Who sponsored that bill? May be we should talk to the same people.
I would think there would be a little less resistance for this? This would ease the pressure on both EB2 and EB3.
I dont know if this has been previously looked at. I know there were talks of excluding these people from quota all together.
hairstyles cricket world cup final 2011
bitu72
07-07 06:28 PM
i just watched it..very brief but very clear..did not talk much about FBI name check and other issue
eb3_nepa
06-05 11:44 AM
Even as it stands RIGHT NOW without the "New AC21 Rules", you cannot use AC21 unless your I-140 is approved. The basic principle of AC21 is "If your I-140 is APPROVED AND your I-485 application has been pending for more than 180 days" you can switch jobs and not lose anything.
hindu_king
08-13 04:11 PM
Just wanted to see how many duplicate application USCIS will get this week.
- My lawyer wants to refile (with no addional lawyer fees). Does it make any sense to re-file?
- Is there a vote somewhere that shows how many july 2 files received receipt notices?
- My lawyer wants to refile (with no addional lawyer fees). Does it make any sense to re-file?
- Is there a vote somewhere that shows how many july 2 files received receipt notices?
No comments:
Post a Comment